|
INSTALLATION OF DIAL UP ADAPTER IN WINDOWS 95 |
| |
|
|
Step 1
Figure 1 |
Click the start button
Select Settings
Select Control Panel
Figure two below displays |
| |
|
|
Step 2
Figure 2 |
Select Networks
Figure 3 as below displays but without the dial up adapter |
| |
|
|
Step 3
Figure 3 |
Click on Add button
Figure 4 below displays |
| |
|
|
Step 4
Figure 4 |
Select the Adapter option on the list
Then click add
Figure 5 as below displays |
| |
|
|
Step 5
Figure 5 |
On the manufactures list
Select Microsoft
On the Adapters list
Slect Dial-Up Adapter
Click OK, You are taken back to Figure 6. Jump to Step
Incase the TCP/IP Protocol is not installed then follow steps 6 and 7 |
|
|
|
Installing the TCP/IP Protocol |
|
Step 6
Figure 6 |
Select Protocol
Click add button
Figure 7 displays |
| |
|
|
Step 7
Figure 7 |
On the manufactures list
Select Microsoft
On Network Protocols list
Select TCP/IP
Click OK
Figure 8 display
To configure the TCP/IP protocol for the adapter, follow steps 8 - 11 |
| |
|
|
Step 8
Figure 8 |
Highlight TCP/IP --> Dial-UP Adapter
Click Properties
Figure 9 Displays |
| |
|
Step 9
Figure 9
Click the IP Address tab. There should be no alterations in this window. Set them as in figure 9 |
| |
|
Step 10
Figure 10
Click the Gateway tab
Add the gateway 63.69.102.4. This should be the only entry in the Installed gateways
Click the DNS tab and figure 11 displays |
| |
|
Step 11
Figure 11
Enable the DNS
On host enter your user name and on domain enter "sdnp.org.mw"
On DNS Server search order enter 63.69.102.5 and add to the list. This should be the only entry |
| |
|
|
Step 12
Figure 12 |
After the above two steps
The TCP IP configuration is set
Upon pressing OK you are requested to restart the computer.
Restart the computer for the changes to take effect.
To Configure the Dialer for the Dial-Up Networking follow Steps 13 - 21 |
| |
|
|
Step 13
Figure 13 |
From the Desk top open My Computer
Figure 13 displays
Click Dial_Up Networking
Figure 14 displays |
| |
|
|
Step 14
Figure 14 |
If no dialer has not been set before only Make New Connection icon shows
Double Click the Icon and Figure 15 displays |
| |
|
|
Step 15
Figure 15 |
Enter the label in the name field preferably " Malawi SDNP "
The modem installed will be selected by default
Click Next
Figure 16 displays |
| |
|
|
Step 16
Figure 16 |
Omit the Area Code
Type in phone number 674900
Click Next
Figure 17 displays as below with the dialer icon "Malawi SDNP" |
| |
|
|
Step 17
Figure 17 |
|
| |
|
|
Step 18
Figure 18 |
Using the right button on the mouse
Click once, a menu displays as in Figure 18
Select properties using the left button on the mouse
Figure 19 displays as below |
| |
|
Step 19
Figure 19
Uncheck "Use country code an area code"
Click the " Server types" Tab button Figure 20 as below displays |
| |
|
Step 20
Figure 20
Verify that the checkers correspond with the ones in diagram
To configure the TCP/IP environment for the dialer follow steps 21 |
|
Step 21
Figure 21
Alter the setup to correspond the settings in Figure 21
Click OK
At this point, the dialer can be used to hook up to the Malawi SDNP network.
To configure Pegasus Mail click this very link |